Trunk connection over IPv6

In some settings it may be desired to span SNMP Proxy Forwarder across IPv6 network. The SNMP traffic is independent, it can run over IPv4 or IPv6 network.

To configure trunk connection over IPv6 network, IPv6 addresses should be set to all the trunk addressing options e.g. trunk-bind-address, trunk-bind-address trunk-peer-address and trunk-peer-address.

Server configuration

Server is configured to:

  • listen on UDP socket at localhost
  • respond to queries performed over SNMPv2c
  • forward all queries to snmpfwd client through an unencrypted trunk connection running in client mode over IPv6 network
#
# SNMP forwarder: Agent part configuration
#

config-version: 2
program-name: snmpfwd-server

snmp-credentials-group {
  snmp-transport-domain: 1.3.6.1.6.1.1.100
  snmp-bind-address: 127.0.0.1:1161

  snmp-engine-id: 0x0102030405070809

  snmp-community-name: public
  snmp-security-name: public
  snmp-security-model: 2
  snmp-security-level: 1

  snmp-credentials-id: snmp-credentials
}

context-group {
  snmp-context-engine-id-pattern: .*?
  snmp-context-name-pattern: .*?

  snmp-context-id: any-context
}

content-group {
  snmp-pdu-type-pattern: .*?
  snmp-pdu-oid-prefix-pattern-list: .*?

  snmp-content-id: any-content
}

peers-group {
  snmp-transport-domain: 1.3.6.1.6.1.1.100
  snmp-bind-address-pattern-list: .*?
  snmp-peer-address-pattern-list: .*?

  snmp-peer-id: 100
}

trunking-group {
  trunk-bind-address: [::1]
  trunk-peer-address: [::1]:30301
  trunk-ping-period: 60
  trunk-connection-mode: client

  trunk-id: trunk-1
}

routing-map {
  matching-snmp-context-id-list: any-context
  matching-snmp-content-id-list: any-content

  matching-snmp-credentials-id-list: snmp-credentials
  matching-snmp-peer-id-list: 100

  using-trunk-id-list: trunk-1
}

Download server configuration file.

Client configuration

Client is configured to:

  • listen on server-mode unencrypted trunk connection at a IPv6 network
  • process all incoming SNMP messages in the same way
  • run command request (and response) PDUs through the logger plugin
  • place inbound PDUs into SNMP v2c messages and forward them to public SNMP agent running at demo.snmplabs.com
#
# SNMP forwarder: Manager part configuration
#

config-version: 2
program-name: snmpfwd-client

peers-group {
  snmp-engine-id: 0x0102030405070809

  snmp-transport-domain: 1.3.6.1.6.1.1.1
  snmp-bind-address: 0.0.0.0:0

  # time out SNMP request in 1 second
  snmp-peer-timeout: 100
  snmp-peer-retries: 0

  snmp-community-name: public
  snmp-security-name: public
  snmp-security-model: 2
  snmp-security-level: 1

  snmp-peer-address: 104.236.166.95:161
  snmp-peer-id: snmplabs
}

trunking-group {
  trunk-bind-address: [::1]:30301
  trunk-ping-period: 60
  trunk-connection-mode: server

  trunk-id: <discover>
}

original-snmp-peer-info-group {
  orig-snmp-bind-address-pattern: .*?
  orig-snmp-context-name-pattern: .*?

  orig-snmp-pdu-type-pattern: .*?
  orig-snmp-oid-prefix-pattern: .*?

  orig-snmp-engine-id-pattern: .*?
  orig-snmp-context-engine-id-pattern: .*?

  orig-snmp-transport-domain-pattern: .*?
  orig-snmp-peer-address-pattern: .*?

  orig-snmp-security-level-pattern: .*?

  orig-snmp-security-name-pattern: .*?
  orig-snmp-security-model-pattern: .*?

  orig-snmp-peer-id: manager-1
}

server-classification-group {
  server-snmp-credentials-id-pattern: .*?
  server-snmp-context-id-pattern: .*?
  server-snmp-content-id-pattern: .*?
  server-snmp-peer-id-pattern: .*?

  server-classification-id: any-classification
}

routing-map {
  matching-trunk-id-list: trunk-1
  matching-orig-snmp-peer-id-list: manager-1
  matching-server-classification-id-list: any-classification

  using-snmp-peer-id-list: snmplabs
}

Download client configuration file.